30/36kW Electric Hydraulic Power Unit
- Surface Equipment
22kW up to 125kW standard design HPU suited to operate large range of tooling and various other applications.
22kW up to 125kW standard design HPU suited to operate large range of tooling and various other applications. Operator friendly unit with basic control and function. Built in low level and overheat protection.
- Sacrificial weld plates on unit
- Primary structure in accordance with DNV 2.7-1
- Can be supplied with auxiliary pressure and flow control valves to suit client requirement
- Pressure, return and drain line filtration
What's In The Box
Industry standard 3/4 wing type hydraulic connector for pressure and return
ISO B connection for case drain
Crowfoot connection for bowman cooler
Supplied with 25M electrical cable
Operating manual
Specifications
| Max Flow | 120 l/min |
| Max Pressure | 320 bar @ 55 l/min 60 Hz operation |
| Motor | 30 kW 4 pole 3 ph Elec motor, 380‐440 volt, 50/60Hz, 1470/1765 rpm |
| Starter | 380/440V, 50/60Hz Star Delta starter/isolator in SS enclosure |
| Filtration | Ikron P+T+D UCC suction |
| Weight | 1500 kg Gross |
| Reservoir | 300 litre hydraulic oil reservoir, internal fluid baffling, complete with filler breather cap, sight glass, Low oil level trip & High oil temp trip |
| Frame | Welded steel Channel skid, Box Section Proection Frame c/w Forklift Pockets, Tie Down Playes & 4 lift points in accordance with DNV 2.7‐1/ BS EN 12079 |
| Dimensions | 1650 x 900 x 1870 mm H |
| Certification | Full certification package for MPI, slings, shackles & load test |