3kW Electric Hydraulic Power Unit
- Surface Equipment
22kW up to 125kW standard design HPU suited to operate large range of tooling and various other applications.
22kW up to 125kW standard design HPU suited to operate large range of tooling and various other applications. Operator friendly unit with basic control and function. Built in low level and overheat protection.
- Sacrificial weld plates on unit
- Primary structure in accordance with DNV 2.7-1
- Can be supplied with auxiliary pressure and flow control valves to suit client requirement
- Pressure, return and drain line filtration
What's In The Box
Industry standard 3/4 wing type hydraulic connector for pressure and return
ISO B connection for case drain
Crowfoot connection for bowman cooler
Supplied with 25M electrical cable
Operating manual
Specifications
| Max Flow | 5 l/min |
| Max Pressure | 275 Bar |
| Pump | Gear Pump, Group 1, 3.5 cc/rev |
| Motor | 3kW TECA 4 pole 3ph elec, 380/440v, 50/60Hz, 1470/1765 rpm |
| Starter | DOL |
| Filtration | Ikron, return filter |
| Weight | 400 kg Gross |
| Control/Relief Valve | Bucher Direction Control Valve c/w Relief Valve with Manual adjustment for required pressure |
| Reservoir | 50 litre hydraulic oil reservoir, internal fluid baffling, c/w filler breather cap, sight glass |
| Frame | Welded steel Box Section Protection Frame, Tie‐Down Plates & 4 Point Lift in accordance with DNV 2.7‐1/BS EN 12079 |
| Dimensions | 785 x 665 x 1060 mm |
| Certification | Full certification package for MPI, slings, shackles & load test |